Get in touch
News.

Data, not footage.

A float hands back measurements, not hours of video: 1.3 cm/px maps, 640×512 radiometric thermal and 4K imagery, each record tagged with time and position.

Every sortie ends with a dataset. A CF-1211 Survey flying 45 ha returns about 1,050 RGB images and 24 GB of data, processed into one map with a ground sampling distance (GSD) of 1.3 cm/px.

What each float records

  • VK-166 Recon: 4K stills and video from a 12× zoom camera, and 640×512 radiometric thermal at 30 Hz.
  • CF-1211 Survey: 45 MP RGB at 1.3 cm/px and 5-band multispectral at 5.3 cm/px, from 100 m.
  • CF-1212 Eyes: 4K video at 30 fps and 640×512 radiometric thermal at 30 Hz.
  • ZZ-R12 Long: 4K video from a 30× zoom camera and 640×512 radiometric thermal, along routes of up to 110 km.

What a record holds

Every image and frame carries the time, the float's position and altitude, the camera's angle and the sensor's settings. Thermal frames are radiometric: each pixel holds a temperature in °C, not just a shade of grey.

That is what makes two sorties comparable. A frame taken from the same point, at the same height and angle, can be set beside last week's pixel by pixel. A difference of 2 °C on a roof, or 3 cm in a stockpile, shows as a number.

Where the data goes

Data stays on the float's onboard card until it lands: 128 GB on the CF-1212, up to 1 TB on the ZZ-R12. It is then copied to the ground station over a cable or a local Wi-Fi link and exported as GeoTIFF, LAS, MP4, JPEG or radiometric TIFF.

Nothing is sent to us. The operator decides where the data goes next and how long it is kept.

Why not video

Video is easy to record and hard to read. An hour of footage takes an hour to watch, and two hours of it are hard to compare. Most of what an operator needs to know is whether something changed: a fence line, a water level, a heat signature on a roof.

So each float is set up to measure, not to film. Where video is the right record, as on the CF-1212 holding a gate, every frame is still tagged and searchable by time and place.

What it means for an operator

A survey becomes a series. The first sortie over a site sets the baseline; every sortie after it is read against that baseline. Change is found by comparison, not by someone watching a screen.

Footage shows what happened. Data shows what changed.

More.

Read all9